Great Pattern
Great Pattern
Make Unique Sewing Patterns That Fit You
Looking for the right sewing pattern making supplies can be a challenge if you are fired up with the idea of replicating great stuff displayed at stores coast to coast. With some of the handy tools available, you can sort of recreate the magic by creating your own sewing patterns. They can be unique and the most common sewing pattern supplies are threads, machines for sewing, needles, sequins and rhinestones. But the main idea is to make sewing making patterns that fit you.
Look for drafting services
Patterns are nowadays done by printing on a single sheet and you need to pick them carefully for matching the measurements. If you settle with a pattern that is ideal for your waist and hip size, your best bet would be to check out a pattern that is very close to the measurement of your hip. You can go easy on the waist line as it can easily be altered later on. Making sewing patterns can be a great challenge and you need to check some of these tips beforehand.
To create your own sewing patterns that would be unique, you should simultaneously look for drafting services. It is a great option if you are not very sure of doing it on your own and unable to alter patterns skillfully.
There are myriad options these days and you can also use software to learn sewing pattern drafting. It is getting common among many women to check out workshops and community colleges as well as e-books to learn more on the subject before they attempt on their own.
But if you want to make your own sewing patterns, you need the right sewing pattern making supplies. And they are all available in standard sizing from commercial pattern making companies. At the back of the envelope, you can find the garment patterns drawn making it easy for you to follow.
If you check out the drawings, it would be easy for you to identify the seam lines of the garments. The keys show the body type ideally suited for the patterns and once you follow them, you can get a perfect fit.
Tailor’s curve and designer’s curve
Among the tools to create unique designs on your own, the tailor curve and the designer curve would be your best bet. With the tailor’s curve you can be assured of perfect measurement for different curves to suit sleeves for coast and jackets. You can be ensured of the accuracy you want with the perfect pattern making tool.
If you use the designer’s curve, there is no way you can go wrong as the tool is a preferred system used by professional designers the world over. There are rulers that are specially tailored for the likes of front line designers and are ideal for any type of curve.
With a first rate sewing pattern making system you can get accurate results. The right sewing pattern making supplies can ensure accuracy and make your sewing experience much more enriching and rewarding.
About the Author
Learning about sewing pattern making and designing can be done right in your own home. With the help of our 3 hour live class room DVD. In the DVD we cover all the necessary information for pattern making, fitting and designing, we also include 6 patterns from our unique system. To learn more about these and other sewing pattern making supplies visit us today at www.tru-fitpatterns.com
Woodworker Pattern woodworking bathroom cabinet plans & blueprints
A few summers ago I was traveling through Martha’s Vineyard on vacation when I stopped at a small antiques store. On one wall was a simple hanging cupboard with two flat panel doors. Its simplicity and convenience caught my eye, and I had never seen one quite like it before. Once home I spent some time rethinking the cupboard and redesigned it to add some details, including the beading on the door edges and the back slats. The original had been made of pine, but I opted for a more dramatic bird’s-eye maple for the exterior with painted poplar inside.Visit the Woodworking Plans Website pages for more woodworking articles.
Here’s how the cupboard goes together: sliding dovetails hold the top to the two sides. The center shelf and bottom rest in dadoes cut in the sides. To strengthen the cabinet, I use traditional square pegs to attach the shelf, bottom, face frame and doors. And I’ve got a great trick to get the pegs to fit easily.
Construction begins by planing the wood to proper thickness, then cutting the top, sides, bottom and shelf to size. Next, using the diagram, mark the dado locations on the sides and cut the 1/2″-deep dadoes. Cut 3/4″-wide by 3/8″-thick rabbets on the sides to hold the back.
The next step is to plough the dovetail slot in the top piece, then form the 1/2″-long sliding dovetail pin on the top end of the sides. Again, find the location for milling the top on the diagrams. A router table works well for both steps, running the top flat on the table, and the sides on end against a fence. Now cut a 1/2″ roundover on the front and sides of the top.
With all the pieces milled, assemble the carcase. Dry-fit the pieces and clamp them in place. Unclamp the piece, add glue and reassemble the carcase. Clamp it up, then drill 1/4″ clearance holes for the pegs through the sides and into the shelf and bottom and drive the 1- 1/2″-long square pegs into the 1/4″ holes.
The face frame uses mortise-and-tenon joinery for strength. Once you’ve cut the 1″-long tenons and the mortises, dry-fit the face frame. Locate and cut the recesses for the hinges on the stiles. Glue and clamp up the face frame. When dry, drill for pinning the mortise and tenon with square pegs. Then fit the frame to the front of the carcase, apply glue and peg the frame in place.
The back pieces use a 5/16″ x 3/8″ mating rabbet (or shiplapped joint) to allow movement in the pieces while still maintaining a gapless back. The back pieces rest in a rabbet cut in the sides, against the shelves and the hanging strip. The hanging strip is nailed between the sides and flush against the top, 3/4″ in from the back edge. Once the back pieces are cut to size, run the mating rabbets on the edges (except for the two outside pieces). As a nice detail I used a moulding cutter head in my table saw to run a single bead on the inside edge of each piece. Test the fit of the back pieces, but leave them unattached at this time to make finishing easier.
The next step is to make the doors. Like the face frame, they are assembled using mortiseand- tenon joinery, with the rails captured between the stiles. The door tenons are 13/8″ long. Cut a 1/4″ x 3/8″ deep groove in the center, inside edge of each door piece to hold the panel, which has a 1/4″ x 5/16″-long rabbet on all four sides to form a tongue. Don’t forget to cut a bead on the outside edge of each stile.
Assemble the doors using glue in the mortises, but keep the glue out of the panel grooves to allow the panel to float in the door frame. Again, the mortise-and-tenon joints are drilled and square pegs added for strength. After the glue is dry, locate and recess the hinge locations, then fit the doors, allowing space for the hinges.
The last construction detail is to add the intermediate and cove moulding to the underside of the top to finish off the upper section of the cabinet. The diagram shows the orientation of the pieces. Miter the moulding to fit, then nail it in place.Visit the Woodworking Plans Website pages for more detailed woodworking plans.
About the Author
Have you ever run out of ideas for woodworking plans ?
Just check out the internet, there are original woodworking patterns to satisfy all skill levels. Or you can select from 14000 woodworking plans, make woodworking easier and more fun !
|
|
The Colette Sewing Handbook (Hardcover) $18.27 A great plan, a great pattern, a great fit, a great fabric, and a great finish: These are the five fundamentals for perfecting any sewing project. Sarai Mitnick, an independent pattern designer setting the high water mark in the industry, shares her… |